Table of Contents
Advertisement
RUGGEDCOM RP110
Installation Guide
Communication Ports
The RP110 comes equipped with a standard IRIG-B port, an RS232/RS422/RS485 pluggable terminal for serial
connections, and a 10Base-T Power over Ethernet (PoE) port for connection with RUGGEDCOM WiN devices.
Figure 6: Port Assignment
1. IRIG-B Port
2. RS232/RS422/RS485 Serial Terminal
The following sections describe the available ports:
•
Section 3.1, "Serial Terminal"
•
Section 3.2, "Copper Ethernet Port"
Section 3.1
Serial Terminal
The RP110 is equipped with a seven-terminal Phoenix-style connector. This connector can accommodate one
RS232 connection, and one RS485/422 connection. The following is the pin-out for the serial terminal:
Serial Terminal
1
2
3
3. Copper Power over Ethernet (PoE) Ethernet Port
Chapter 3
Communication Ports
9
Advertisement
Table of Contents
