Advertisement
After you have selected the desired Projection Modes for the Demo, Tap OK...
This will return you to the Survey Pro CE Main menu...
At this stage of the demo, the TDS Ranger needs to be connected to the Base RTK
receiver. Both of the GPS receivers should be powered ON and tracking satellites.
The PDL Base Radio should also be powered ON.
Measure the GPS Antenna Heights for the RTK Base GPS Antenna and the RTK Rover
GPS antenna.
[ 3 ] Survey - [ A ] GPS Status
Next, Tap on the
menu
The next screen...
Figure 14
The GPS Status screen confirms you have established communications between the TDS
Ranger and the RTK base Receiver.
Notice the Receiver Mode: Off, this indicates the GPS receiver is still in STATIC mode,
configure the GPS Receiver for RTK Base mode.
Note the Receiver is already tracking and using 6 Satellites.
Thales Navigation: ZXSS-TDS v3.2.1 Localization
8
Advertisement
