Advertisement
In this menu, perform the TDS GET (GET Position From Rx.)
But, first input Average Position 60 Epochs before GET, then Tap
"GET Position From Rx."
When using the TDS Localization, the recommended field procedure is to read / average
the WGS84 position from the RTK Base receiver for 60 seconds. This provides a better
base reference position. A one-second Get with bad PDOP spike and weak Satellite
Geometry may result in a suspicious RTK Base reference point.
Thales Navigation: ZXSS-TDS v3.2.1 Localization
The next screen...
Figure 21
This returns to the Base Setup menu...
Tap on the Next > button...
The next screen...
Figure 22
12
Advertisement
