Advertisement
This will start a new a data file in the GPS receiver's internal PC Card memory,
for Post-Processing applications, (Code & Carrier Data).
This is the "Trigger" that switches the receiver from STATIC MODE into RTK BASE
MODE. The receiver is now configured as a RTK Base, the PDL Base Radio should now
begin to Transmit RTK corrections out to the RTK Rover(s)...
Thales Navigation: ZXSS-TDS v3.2.1 Localization
The next screen...
Figure 25
Tap on the Reset button...
The next screen...
Figure 26
Tap the OK button
14
Advertisement
