Page 4
Rice Lake continually offers web-based video training on a growing selection of product-related topics at no cost. Visit www.ricelake.com/webinars. ATK Automated Ticketing Kiosk...
Introduction This manual is intended for use by technicians responsible for installing and servicing the ATK Automated Ticketing Kiosk System. Authorized distributors and their employees can view or download this manual from the Rice Lake Weighing Systems distributor site at www.ricelake.com...
Ethernet/serial cable. 2.1.1 Installing the Printer Depending on which printer is selected, printer installation within the ATK Printer Kiosk may vary. Consult individual printer documentation to ensure the printer is installed correctly. Accessing the Printer Once the printer is installed, it can be accessed via the front panel printer access door. This sliding door is locked from the inside;...
2.1.2 Connecting Power and Ethernet/ Serial Cable WARNING To avoid shock or serious injury, consult a licensed electrician for any electrical installation procedure. Connecting the Ethernet Cable 1. Locate the Ethernet card mounted in the upper-left corner of the long kiosk wall. 2.
Check-In And Check-Out Procedures There are several check-in and check-out methods using the ATK Kiosk System (RFID card reader, number keypad, number keypad/card reader combo, smart pass antenna, smart pass and HID tags). RFID Card Reader Radio frequency identification (RFID) stores and retrieves data by using a special RFID card/badge.
Number Keypad/RFID Card Reader Some kiosk systems are equipped with a combination number keypad/RFID card reader, providing the option of using either method described in Section 3.1 or Section 3.2 for storing and retrieving data. Figure 3-3. Number keypad/RFID combo Smart Pass Antenna The Smart Pass Antenna allows drivers to check-in and check-out without stopping.
Need help?
Do you have a question about the ATK and is the answer not in the manual?
Questions and answers