Rice Lake RL-22DT Operation Manual
  1. Manuals
  2. Brands
  3. Rice Lake Manuals
  4. Printer
  5. RL-22DT
  6. Operation manual
Rice Lake RL-22DT Operation Manual

Rice Lake RL-22DT Operation Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
RL-22DT/RL-42DT
Thermal Printer
Version 3.007
Operation Manual
108222

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RL-22DT and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Rice Lake RL-22DT

Summary of Contents for Rice Lake RL-22DT

  • Page 1 RL-22DT/RL-42DT Thermal Printer Version 3.007 Operation Manual 108222...

  • Page 3: Table Of Contents

    6.7 Troubleshooting ............. . . 25 RL-22DT/42-DT Limited Warranty......................26 © 2011 Rice Lake Weighing Systems. All rights reserved. Printed in the United States of America. Specifications subject to change without notice.
  • Page 4 RL-22DT/RL-42DT Operation Manual...

  • Page 5: About This Manual

    Don’t repair or adjust energized equipment alone under any circumstances. Someone capable of providing first aid must always be present for your safety. Printer Parts Feed key LED Light Cover Option Power Switch button Figure 1-1. Outside of printer RL-22DT/42DT Operation Manual - Introduction...
  • Page 6 Print Mechanism Print Head Lift Label Roll Core Label Roll Holder Label Guides Front Cover Piece Figure 1-2. Inside of printer Label Sensor Platen Cover Platen Cover Label Roller Figure 1-3. Inside of printer RL-22DT/42DT Operation Manual...
  • Page 7 Fan-Fold Label Insert Serial Port (RS-232) Power Socket USB Port Figure 1-4. Back of printer Hang Holes Bottom Case Cover Figure 1-5. Bottom of printer RL-22DT/42DT Operation Manual - Introduction...

  • Page 8: Installation

    2. Press and release the lock of the label roll core. 3. Pull up the label roll holder and lift the label roll core upward. 4. Place a new label roll onto the label roll core. RL-22DT/RL-42DT Operation Manual...
  • Page 9 5. Flip the label roll core downward and pull back the label roll holder. 6. Pull and lock the label roll core to the original position. 7. Put the label under the label guide and stretch it frontward. RL-22DT/RL-42DT Operation Manual - Installation...
  • Page 10 8. Pull the label guide inward and make it fit the edge of the label. 9. Close the top cover to complete the label installation. RL-22DT/RL-42DT Operation Manual...

  • Page 11: Label Roll Core Switch

    When the lock hole of the label roll core is on the lower 1” Core side, it applies to a 1.5” core. You can also distinguish it by the index on the label roll core as shown in the figure to the right. 1.5” Core RL-22DT/RL-42DT Operation Manual - Installation...

  • Page 12: Pc Connection

    This will delete all stored forms from the printer memory. This will open up doors for a simple label application, and works with most devices that are sending a single weight and capable of 9600 baud, 8 data bits. RL-22DT/RL-42DT Operation Manual...

  • Page 13: Accessories

    QLabel and the E value is 9. 3. Place the printer on a horizontal surface and open the top cover. 4. Remove the front cover piece. You can use a coin or screwdriver to open Note the front cover piece. RL-22DT/RL-42DT Operation Manual - Accessories...
  • Page 14 7. Turn the printer around and tighten screws to secure the stripper module. 8. Unlock the bottom case cover to see the main board of the printer. You can use a coin or screwdriver to open Note the bottom case cover. RL-22DT/RL-42DT Operation Manual...
  • Page 15 10. Lock the bottom case cover. 11. Turn the printer back to proceed with label installation. 12. Flip the stripper module downward to open it. 13. Follow the instructions in Section 2.1 on page 4 to install the label. RL-22DT/RL-42DT Operation Manual - Accessories...
  • Page 16 15. Follow the direction shown in the figure to the right to feed the liner across the stripper module. 16. Flip the stripper module upward to close 17. Press the FEED key to adjust the position of the label and complete the installation. RL-22DT/RL-42DT Operation Manual...

  • Page 17: Cutter Installation

    500,000 cuts for paper weights 120g/m 170g/m 3. Place the printer on a horizontal surface and open the top cover. 4. Remove the front cover piece. You can use a coin or screwdriver to open Note the front cover piece. RL-22DT/RL-42DT Operation Manual - Accessories...
  • Page 18 7. Turn the printer around and tighten screws to secure the cutter module. 8. Unlock the bottom case cover to see the main board of the printer. You can use a coin or screwdriver to open Note the bottom case cover. RL-22DT/RL-42DT Operation Manual...
  • Page 19 11. Turn the printer back to proceed with label installation. 12. Follow the instructions in Section 2.1 on page 4 to install the label. 13. Feed the label through the cutter and press the FEED key to complete the installation. RL-22DT/RL-42DT Operation Manual - Accessories...

  • Page 20: Control Panel

    FEED key will feed one label at a time. If the label is not sent out in a correct position, please proceed with the Auto sensing (see Section 4.4 on page 17 RL-22DT/RL-42DT Operation Manual...

  • Page 21: Self-Test

    FEED key. The printer will automatically detect the label size/length and record it. 4. A Self-Test page will be printed after Auto-Sensing is complete. The printer will then return to Standby mode. RL-22DT/RL-42DT Operation Manual - Control Panel...

  • Page 22: Dump Mode

    2 beeps twice File name is repeated; printer will print Change the file name and download again, or delete the file. “Filename is repeated” Table 4-2. Error messages RL-22DT/RL-42DT Operation Manual...

  • Page 23: Maintenance And Adjustments

    3. Flip the print head lift downward to release it. 4. The print head bracket can be flipped downward after the print head lift is released. RL-22DT/RL-42DT Operation Manual - Maintenance and Adjustments...
  • Page 24 8. After the new print head is installed, tighten the print head screws, plug the print head connector, restore the print head bracket, and lock the print head lift to complete installation. 9. Clean the print head to remove any finger prints, etc. RL-22DT/RL-42DT Operation Manual...

  • Page 25: Thermal Print Head Cleaning

    Then, remove the jammed label. 4. After the jammed label is removed, turn the cutter adjustment screw clockwise to restore the paper-knife. RL-22DT/RL-42DT Operation Manual - Maintenance and Adjustments...

  • Page 26: Appendix

    When the see-through sensor is enabled, the moveable sensor must be placed in the center of the printer. Table 6-2. See-through sensor ˆHx - Print Darkness Setting Syntax ˆHx Parameter x = 00 ~ 19 Description Sets the darkness of printing Table 6-3. Print darkness setting RL-22DT/42-DT Operation Manual...

  • Page 27: Specifications

    Width: 168 mm (6.61") Weight: 1.2 Kg Weight: 1.5 Kg Options Rotary Cutter Module Rotary Cutter Module Stripper Module Stripper Module Internal Ethernet Adapter Card Internal Ethernet Adapter Card Parallel port Table 6-4. Printer specifications RL-22DT/42-DT Operation Manual - Appendix...

  • Page 28: Compliance Statements

    European Standard EN55022 for the both Radiated and Conducted emissions limits. RICE LAKE SERIES TO WHICH THIS DECLARATION RELATES IS IN CONFORMITY WITH THE FOLLOWING STANDARDS EN55022 : 1998,CLSPR 22, Class A / EN55024 : 1998IEC 61000-4 Serial / EN61000-3-2 : 2000 / EN 6100-3-3 : 1995 / CFR 47, Part 15/CISPR 22 3rd Edition : 1997, Class A / ANSI C63.4 : 2001 / CNS 13438 / IEC60950-1...

  • Page 29: Serial Interface

    11____________11 normally occurs 12____________12 The stripper module isn’t • Check if stripper module sensor is covered with dust working correctly Table 6-7. Internal interface specs • Check if label is installed properly Table 6-8. Troubleshooting RL-22DT/42-DT Operation Manual - Appendix...

  • Page 30: Rl-22Dt/42-Dt Limited Warranty

    RL-22DT/42-DT Limited Warranty Rice Lake Weighing Systems (RLWS) warrants that all RLWS equipment and systems properly installed by a Distributor or Original Equipment Manufacturer (OEM) will operate per written specifications as confirmed by the Distributor/OEM and accepted by RLWS. All systems and components are warranted against defects in materials and workmanship for two years.
  • Page 32 PN 108222 02/11...

This manual is also suitable for:

Rl-42dt

Table of Contents