Canon Unit-BF1 Service Manual page 45

4
13
13) Install the supplied punch unit fixing pin, and then secure it with the suppied
screw (TP, M3 x 6).
x1
15
15) Lace the punch unit harness through seven cable guides, and then attach the re-use band. Connect
the punch unit connectors to the two connectors (CN127 and CN128) on the finisher controller PCB.
x7
x2
4
14
14) Connect the punch unit harness to the connector.
x1
F-4-33 F-4-33
16
16) Connect the punched waste paper full sensor harness connector
to the connector (CN4) on the punch controller PCB.
\
F-4-35 F-4-35
F-4-34 F-4-34
F-4-36 F-4-36
4-13
4-13