▣ Auto Provision
There are the following three modes.
♦ HTTP : automatic upgrade via the Web server. The default file name must be set after setting the corresponding
HTTP address and the port number.
♦ HTTPS : automatic upgrade via the Web server. The default file name must be set after setting the corresponding
HTTP address and the port number.
♦ TFTP : Get IP from the DHCP server, and then connect to the the TFTP server and download the configuration. The
TFTP server address and port number (Default: UDP - 69) must be set.
WP300S provides automatic F/W upgrade via CLive connection, so do not recommend using this feature.
61
Admin Manual
Liberty L2 (WP300S)