Table of Contents
Advertisement
CLive Standard Quick User Guide
Once power is on the phone, it will try connecting to Clive as following sequence.
(After Factory reset, should connect Clive again)
※ Tip
If your account information is too long to key in, please refer to the followings.
Step 1. Once CLive authentication is started, long press 'End' button to shut down te phone to stop CLive connecting.
Step 2. Go to the phone Web UI, and key in the account and server information.
Step 3. Once the account information is verified, reboot the phone.
Step 4. CLive starts authentication then select 'Standard', and key in email and account information.
Step5. This time, the phone still has the previous account information, so press 'Search' key to verify, and if the
account information is verified, the phone will be connected to CLive.
Step 1. Select one Service Provider.
Step 2. Key in user's Email address. (you can skip this menu)
Step 3. Key in SIP account information.
After keyin Account number, Password, Server Info, press '
verify the account information.
Once the account information is verified, the phone will be connected to
CLive.
14
Admin Manual
Liberty L2 (WP300S)
' key to
Advertisement
Table of Contents
