apivio Liberty L2 Administrator's Manual page 49

♦ Replace Enable : It turns certain numbers added to a number into a preselected number.
Used in international calls.
Ex) 006|007XX|008 -> 00755
- Turns a number starting with 006 into 00755.
- Turns a 5-digit number starting with 007 into 00755.
- Turns a number starting with 008 into 00755.
♦ Pick Up Code : If the phone is in the same Pick-up group, then enter the same pickup code to answer
another user's incoming call on the current phone. To use pick up feature, the server has set the same pick up code
with the phone.
Used for picking up on the user's phone a call made to another phone if they are registered in the same group in the
currently-used VoIP server. The relevant functions and codes need to be set beforehand to use it.
♦
Hold Type : Servers operating in connection with the phone can be set with different hold types depending on the
vendor and specification. The Moimstone phone has high compatibility with servers by enabling configuration of the
hold type by the user according to the vendor and specification. The hold type can be selected as below.
- RFC 2327: Sends signal according to the RFC 2327 specification. The RTP point of SDP is set as 0.0.0.0.
- RFC 3264: The hold type according to the RFC3264 specification. The SDP attribute is set as Secondary.
- Xener-Enblock: The hold type of Xener SSW.
♦
SMS Code : The SMS code specified by the network provider must be entered. (default : 0)
49
Admin Manual
Liberty L2 (WP300S)