Network
▣ Web Config
♦ Port : When connecting via Web, set the number following the IP address of the phone.
ex)
http://192.168.15.173:8000
▣ Roaming Setting (using supplicant roaming)
♦ Use Roaming :
If an AP with an RSSI less than "minimum sensitivity" – "Delta rssi" and greater than the "minimum
sensivity of the roaming AP" is found, a romaing is attempted to that AP.
♦ Minimum Senstivity : If the RSSI of the currently-connected AP drops below a configured level, a background scan
is performed for raoming.
♦ The minimum sensitivity of the roaming AP : If an AP (which meets the condition for a roaming) with an RSSI
greater than the level set at the time of roaming is found, a roaming is attempted. If the value is 0, a roaming is
attempted to an AP with an RSSI greater than that of the current AP.
* Roaming during a call and IDLE roaming are only available between APs using same SUBNET and the APs should use
the same SSID value.
55
Admin Manual
Liberty L2 (WP300S)