apivio Liberty L2 Administrator's Manual page 37

◁ Phone Lock
□ Setting Procedures
[Menu] ▶ 7. Settings ▶ 2. Phone lock
Phone lock is used to lock the WP300S to prevent it from unauthorized use.
Once the WP300S is locked, a user must enter the password to unlock it.
The WP300S will not be locked immediately after the phone lock type
Configured. The follow steps is also needed:
- Long press the pound key when the WP300S is idle
① PIN Number : set a password to use the phone.
- Default PW is '0000'.
- Current PW à New PW à Confirm New PW à Press [
② Lock setting : set/unset phone lock.
- This phone to be prevent others from using it.
- Lock Setting à Enter Password à Select Setting/Clear à press [
- On idle menu, [#] button for long time.
◁ User Default
□ Setting Procedures
[Menu] ▶ 7. Settings ▶ 3. User default
- Clear all the user set-up value.
- After set default, the phone will reboot.
- User default password is '0000'.
- User default menu is to reset all the set up value, but the account info,
Contact info, Clive connection and call log will be not removed.
- To set up as factory reset, please see the following
On idle menu, press *7008*#.
Or
Go to hidden menu (**6646*00) and press PW(9999), and press 7. System ▶ 1. Factory Reset ▶ '9999'
then, the phone will set as factory reset.
] button
] to save.
37
Admin Manual
Liberty L2 (WP300S)