If automatic connection fails.
[Menu]
▶ 7. Setting ▶ 1. Wi-Fi Setting
▶ 1. Profile
And check the registered profile list.
Register the device after select the desired profile
If profile is not registered.
[Menu]
▶ 7. Setting ▶ 1. Wi-Fi Setting ▶ 2. Search Wi-Fi AP
Check the WLAN list on the current searching.
After select the WLAN, click the [Menu] ▶ 3. Add profile to add profile. Again back to [Menu] ▶ 7. Setting ▶
1. Wi-Fi Setting ▶ 1. Profile and select the connect profile to register device.
15
Admin Manual
Liberty L2 (WP300S)