Web Setting - apivio Liberty L2 Administrator's Manual

▣ Web Setting

Web setting uses a user-friendly Web browser to set the phone and check phone information. Since a computer is used,
it's much more convenient to use than the button-based setting method. WP300S uses a Web-configured security system
to manage accounts, so it blocks access by people other than the phone administrator. On the address box of the Web
browser, enter the IP address as below. Then, you can use the configuration menu of WP300S
Access Web UI
Checking IP Address
▣
[Menu] ▶ 8. System info ▶ 3. Network info
▣ Access Method
- For the first access to web UI, web setting should be enabled on the phone. (Default : Enable)
To access Hidden menu, (hidden key : *74123598* à P/W 9999) à 3. Remote à 1. Web à Update (if not using web
UI for long time, this setting returns to web disable mode, so you should set up again to use it.)
- In case the IP address of the phone is 192.168.20.183, enter http://192.168.20.183:8000 and then the authentication
window will pop up as below.
- In an authentication window as below, enter "admin" for user name (U) and "9999" for the password (P).
You can use the Web configuration menu in this admin mode.
43
Admin Manual
Liberty L2 (WP300S)