VTech VCS601 User Manual page 9

Pairing your mobile device using NFC
NOTE: iPhone does not support Bluetooth pairing through NFC.
1. On your mobile device, turn NFC on.
2. Place the NFC zone of your mobile device against the NFC zone of the speakerphone (indicated
by ).
When NFC is detected, the speakerphone plays a tone. All the multicolored LEDs turn white for
one second.
3. If you are asked for a PIN code, enter 0000.
• If NFC pairing does not work, try again or try connecting via Bluetooth pairing.
Speakerphone functions
Play audio
When your speakerphone is paired to a Windows PC or mobile device, it acts as an external speaker
and plays audio from the paired device.s
When your speakerphone is playing audio from a paired Bluetooth device, the Bluetooth audio will be
interrupted and changed to PC audio immediately if you connect the speakerphone to the Windows
PC with the USB cable.
When your speakerphone is playing PC audio, this audio will be interrupted and changed to mobile
audio if there is an incoming mobile phone call.
Receive a call
When your paired mobile phone receives an incoming call, the speakerphone rings and all the
multicolored LEDs flash blue.
When there is an incoming call from a PC application, the speakerphone rings and all the multicolored
LEDs flash green.
Answer an incoming call
• Press the key.
During the call, the multicolored LEDs turn white to indicate from which direction the microphones
are receiving sound.
Call Waiting
If your paired mobile phone receives an incoming call while a call is in progress, the speakerphone
beeps twice.
• Press the key to hold the current call and switch to the incoming call.
Reject an incoming call
• Press and hold the
End a call
• Press the key.
key for at least two seconds.
9