Installing An E3.S Drive Blank; Removing The Drive Carrier - Dell PowerEdge C6600 Installation And Service Manual

Figure 71. removing a SSD drive blank

Installing an E3.s drive blank

Prerequisites
1. Follow the safety guidelines listed in the
Steps
Insert the drive blank into the drive slot until the release button clicks into place.
Figure 72. Installing the E3.s drive blank

Removing the drive carrier

Prerequisites
1. Follow the safety guidelines listed in the
2. Using the management software, prepare the drive for removal.
If the drive is online, the green activity or fault indicator blinks while the drive is powering off. When the drive indicators are
off, the drive is ready for removal. For more information, see the documentation for the storage controller.
Safety instructions.
Safety instructions.
Installing and removing system components 69