Table of Contents
Advertisement
2. Slide and lift the mid top cover from the system.
Figure 28. Removing the mid top cover
Next steps
Replace the mid top
cover.
Installing the mid top cover
Prerequisites
1. Follow the safety guidelines listed in
2. Follow the procedure listed in
Steps
1. Align the tabs on the mid top cover with the guide slots on the system and slide the mid top cover toward the front of the
chassis until it locks into place.
2. Using the Phillips 1 screwdriver, secure the mid top cover to the system with screws.
32
Installing and removing system components
Safety
instructions.
Before working inside your
system.
Advertisement
Table of Contents
