AEG BSE772380M User Manual page 27

Step 1 Place the deep pan on the first shelf position.
Step 2 Fill the water drawer with water to the maximum level until the signal sounds or the display shows
the message.
Step 3 Select: Menu / Cleaning / Rinsing.
Duration: around 30 min
Step 4 Turn on the function and follow the instruction on the display.
Step 5 When the function ends, remove the deep pan.
When this function works, the lamp is off.
11.8 How to use: Tank emptying
Use it after cooking with steam heating function to remove the residual water from the water
drawer.
Turn off the oven and wait until it is cold.
Step 1 Place the deep pan on the first shelf position.
Step 2 Select: Menu / Cleaning / Tank emptying.
Duration: 6 min
Step 3 Turn on the function and follow the instruction on the display.
Step 4 When the function ends, remove the deep pan.
When this function works, the lamp is off.
11.9 How to remove and install:
Door
You can remove the door and the internal
glass panels to clean it. The number of glass
panels is different for different models.
WARNING!
The door is heavy.
Step 1 Fully open the door.
Step 2 Lift and press the clamping levers
(A) on the two door hinges.
Before you start:
CAUTION!
Carefully handle the glass, especially
around the edges of the front panel. The
glass can break.
Remove all accessories.
A
A
ENGLISH 27