Huawei iSitePower-M MAP05A1 Quick Manual page 21

6.7 Installing a Genset Control Signal Cable
For a generator set (genset) that starts when the dry contact is open, connect the signal cable
•
to ports NO and COM. For a genset that starts when the dry contact is closed, connect the
signal cable to ports NC and COM.
In the genset + mains scenario, the ATS must support the mains detection function. Connect
•
the mains detection cable of the ATS to the dry contact port DIN1.
Genset-Only Scenario
Genset + Mains Scenario
Genset
Genset
ATS
20