Using Your Steam Cleaner; Filling The Water Tank - Dirt Devil SM11 User Manual

USING YOUR STEAM
CLEANER
WARNING: Danger of scalding

FILLING THE WATER TANK

IMPORTANT
Don't overfill the water tank. Don't use the steam cleaner without water in the tank. Always top up with
water in good time.
1. Ensure the steam cleaner is turned off.
2. Grip the handle, press the tank release buttons and pull the water tank to remove.
3. Pull the tab on the tank cap to open. Fill the tank with water. Replace the cap and push firmly to close.
4. Before replacing the water tank make sure the hard water filter, which is located behind the tank, is in
place.
5. Line up the water tank with the main body of the steam cleaner and push it until it clicks into place.
If the water tank is not fitted correctly there will be a reduction in the amount of steam produced.
Your machine has been designed to be used with tap water. However, if you live in an area with hard water,
limescale build-up may occur. Therefore, to maintain the optimal performance of your steam cleaner, it is
recommended to use distilled, de-mineralised or filtered water. It is recommended that a descaler solution is
used after every 5 hours of usage to prevent limescale build-up.
1
1
1
4
1
2
5
1
3
USER MANUAL 9