Si-2 Control Functions; Software Installation Instructions - Decatur Electronics SI-2 Technical Manual

System interface

Table of Contents

1. Insert the SI-2 disk in the floppy disk drive and/or downloaded SI2Config.exe file. Place it in the folder

in which you want it to reside.

2. Click the Windows ® Start button and choose Run from the Startup menu.

3. Type the name of the file location. For example, if you are using the SI2Config.exe file from your floppy

drive called A:, you type A:\SI2Config.exe. You can also use the Browse button to navigate to your

floppy drive, then double click the file SI2Config.exe.

4. The Configuration Install dialog box appears. Click the Setup botton to start the setup program.

5. Follow the instructions on your screen. Most users simply repeatedly click the Next button.

6. Click the Finish button to exit the Setup program.

7. You will now want to configure your SI-2. Continue to the next page, Configuration Instructions.

SI-2 CONTROL FUNCTIONS

SI2Config.exe icon

Configuration Install dialog box

SI-2 Config Setup Program

Table of Contents

Si-arcade