Control Panel Functions; Trigger Operation - Decatur Electronics GENESIS-VP DIRECTIONAL User Manual

1.1.2 Control Panel Functions

1.2 Trigger Operation

The Genesis-VPD transmits and receives microwave
energy when you pull the trigger. When you want to
lock onto a speed, release trigger, then pull it again
within 1/2 second.
move to the right window and flash alternately between
it and a directional indicator (t means the target
vehicle is moving toward you, and A means away.) The
locked speed clears when you pull the trigger again.
1
You can request Trigger Release Lock software that works another
way. When you release the pulled trigger, the target speed locks and
displays in the LOCKED window.
Figure 1.1.1 Insert the batteries into the handle grip.
Push the batteries into the receptacles in the
bottom of the handle until you hear them snap into
place.
The factory default settings for the control panel
are
dir Direction
bL Backlight
Aud Audio volume
SEn Sensitivity
SLh Squelch
See section 3 Operating Modes for more on the
settings and how to change the default settings.
1
GENESIS-VPD™ USER'S MANUAL
Default
t A
On
3
5
On
The speed in the left window will
Rev. 09/04
7