Advertisement
en_us | 45 | T40211
1 General Information
Product Name:
Product Type:
Product Number:
Weight:
Max. load capacity:
Static Test Coefficient:
Intended Use:
The support serves for holding the wheel set of the
6-gear manual gearbox as well as the automated
gearbox (R-tronic) 086 of the Audi R8 2017 onwards,
in accordance with the workshop manuals of the
Volkswagen Group brands.
Terms of Use:
Only for qualified workshop personnel.
The support T40211 may only be used with the
engine and gearbox trestle VAS 6095/VAS 6095A or
with the clamping block VW313.
Only use the support T40211 with the engine and
gearbox trestle VAS 6095/VAS 6095A on level,
horizontal, and weight-bearing ground.
Only use with a workshop crane (e. g. VAS 6100)
approved by Volkswagen.
Only use the load holding device for work approved
by the Volkswagen Group.
Use only for loads up to 110 kg.
Do not hold or lift any persons or animals.
Do not hold or lift articles other than described in
the workshop manuals of the Volkswagen Group
brands.
Do not stand under suspended loads.
Do not work on the suspended load.
Only use in connection with the approved
accessories (see workshop manuals of the
Volkswagen Group brands).
2018-05-02
Support
Load holding device
T40211
9.66 kg
110 kg
3.0
Figure 1:
Support T40211
1
Base plate T40211/1
2
Spacer sleeve T40211/2
3
Pin with ring bolt
4
Support T40211
5
Spacer sleeve T40211/3
6
Circlip
Bosch Automotive Service Solutions GmbH
Am Dörrenhof 1
85131 Pollenfeld-Preith
Germany
Advertisement
Chapters
