Abx Fast Error Response Structure; Table 6-4: Abx Fast - Error Response Structure - EMS COBALT C0405 Series Operator's Manual

6 . 2 . 5
A B x F a s t E r r o r R e s p o n s e S t r u c t u r e
ABx Fast error responses contain a two-byte Header, a two-byte Response Size
parameter followed by a single-byte Error Flag (0xFF) and a single-byte Error Code
parameter, which identifies the error that occurred.
E R R O R R E S P O N S E E L E M E N T
Header
Response Size
Error Flag
Error Code
Checksum
Terminator
A B F A S T E R R O R R E S P O N S E E X A M P L E
X
Below is an example of an ABx Fast error response for a failed Write Data command
(error code 0x06).
E R R O R R E S P O N S E E L E M E N T
Header
Response Size
Error Flag
Error Code
Checksum
Terminator
NOTE:
For a full description of ABx Fast error codes, see publication ABx Fast Protocol –
Reference Manual, available online at www.ems-rfid.com.
C 0 4 0 5 - X X X - 0 1 O P E R A T O R ' S M A N U A L – R E V . 0 3
C H A P T E R 6 : C O M M A N D P R O T O C O L S

Table 6-4: ABx Fast - Error Response Structure

C O N T E N T
0x02, 0x02
0x0002
0xFF
Single-byte Error Code
Optional
0x03
C O N T E N T
0x02, 0x02
0x0002
0xFF
0x06
Optional
0x03
P A G E 5 8 O F 7 5