Chapter 3: Power & Communication; Power Requirements; C0405-232-01/C0405-485-01 Power Requirements; C0405-Usb-01 Power Requirements - EMS COBALT C0405 Series Operator's Manual

CHAPTER 3:
POWER & COMMUNICATION
3.1 P
OWER
3 . 1 . 1
C 0 4 0 5 - 2 3 2 - 0 1 / C 0 4 0 5 - 4 8 5 - 0 1 P o w e r R e q u i r e m e n t s
C0405-232-01 and C0405-485-01 RFID controllers requires an agency compliant
LPS power supply capable of providing 10~35VDC, 2.4W (100mA @ 24VDC, 1 Amp
peak).
EMS Power Supplies for C0405-232 and C0405-485 RFID Controllers
PART NU MB ER
00-1166
00-1167
00-1168
3 . 1 . 2
C 0 4 0 5 - U S B - 0 1 P o w e r R e q u i r e m e n t s
The C0405-USB-01 RFID Controller obtains power directly from the USB bus.
Typical power consumption under normal conditions = 1W (200mA @ 5VDC).
CAUTION:
Do not connect or disconnect the C0405 while power is being applied. Turn the power
supply off at the source prior to connecting or disconnecting the unit. Reapply power
only after the controller has been reconnected.
Use only high quality, shielded cables for power and interface connections. See
Appendix B
C 0 4 0 5 - X X X - 0 1 O P E R A T O R ' S M A N U A L – R E V . 0 3
R
EQUIREMENTS

Table 3-1: EMS Power Supplies

for a list of compatible cables and network components.
C H A P T E R 3 : P O W E R & C O M M U N I C A T I O N
D E SCR IPTION
45W, 1.88A max @ 24VDC
100W, 4.17A max @ 24VDC
120W, 5.0A max @ 24VDC
P A G E 3 1 O F 7 5