Table of Contents
Advertisement
Installation and User Guide
4.2
Language setting
DEVIreg™ Hotwater controller has different programmed languages located in Sub-menu
Service under languages .
4.3
Date and Time settings
DEVIreg™ Hotwater controller has RTC (Real Time Clock) for fixing time of data logging
information, for example Alarms .
NB: Battery back-up time is min . 48 hours .
4.4
BMS(Building Management System) settings
DEVIreg™ Hotwater controller has Modbus RS-485 opto-insulated serial interface .
Modbus RS-485 settings can be done by the following menu sequence:
EN: Main Screen – Enter
Serial settings
EN: Main Screen – Enter to Main Menu – Device settings – BMS settings – { Enter –
Serial address – Down – Serial baud rate – Down – Serial settings }
More detailed information is contained in the Appendix A .
16
DEVIreg™ Hotwater
to Main Menu – Enter
to Service – Enter
FEC | Produced by Danfoss ©
to
Advertisement
Table of Contents
Need help?
Do you have a question about the DEVI DEVIreg Hotwater and is the answer not in the manual?
Questions and answers