Setting The Type Of View For Stored Names And Numbers - Nokia 6210 User Manual

• To switch between upper case and lower case, press
at the top of the display indicates the selected case.
• To insert a number, press and hold the key labelled with the desired number. Number mode is
indicated by 123 at the top of the display. To switch between letters and numbers, press and
hold .
• Pressing brings up a list of special characters. Move through the list to the desired
character with
• If the character list continues on to another screen, you can scroll between the screens by
pressing .
• If you make a mistake, you can remove characters to the left of the cursor by pressing
many times as necessary. Pressing and holding
• and move the cursor right and left, respectively.
Tip: If you key in the + character for the international prefix (press
the country code, you will be able to use the same phone number when you are calling
from abroad.
Quick save:
When in the standby mode, key in the phone number, press Options, and select Save. Then,
enter the name and press OK.
Or, if you wish, save the number only: key in the phone number and press and hold Options.

Setting the type of view for stored names and numbers

You can set your phone to show the stored names and numbers in two different ways.
1. Press Names, scroll with
36 ©2000 Nokia Mobile Phones. All rights reserved.
or and press Use to insert it in the name.
or to Options
quickly. The symbol ABC or abc shown
Clear will clear the screen.
and press Select.
Clear as
twice) in front of