Related Manuals for Excalibur Water Systems SMART PURIFIER BP-500G
Summary of Contents for Excalibur Water Systems SMART PURIFIER BP-500G
- Page 1 SMART PURIFIER™ MANUAL Excalibur Water Systems Inc. 142 Commerce Park Drive Barrie, ON, Canada L4N 8W8 Telephone: (705) 733-8900 Fax: (705) 733-8904...
-
Page 2: Table Of Contents
Smart Purifier™ User Manual Packing List…………………………………………………………………………………………………. 3 Notice………………………………………………………………………………………………………….. 4 Product Specifications……………………………………………………………………………….… 6 Purity to Waste Ratio………………………...………………………………………………………… 6 RO Technical Drawings………………………...……………………………………………………… 7 Product Introduction………………………...…………………………………………………………. 8 Installation & Maintenance……………………...………………………………………………..… 9 Troubleshooting………………………...……………………………………………………………… 16... -
Page 3: Packing List
Packing List Water Purifier 1 pc 1/4" PE Pipe Instruction Manual 1 pc 3/8" PE Pipe Inlet Water T Valve 1 set Faucet 1 set Tape 1 roll Adapter 1 pc Pipe Pulling Tool 1 pc 1/4" Blue clip 9 pcs 1/4"... -
Page 4: Notice
Notice Attention: Please obey the following safety regulations strictly 1. Do not use other accessories which are not permitted by manufacturer to avoid any damage of the RO system. 2.Please check the RO system and all accessories before installation. 3.Children are only permitted to maintain the system under guardian supervision. - Page 5 Notice...
-
Page 6: Product Specifications
Product Specifications Product Reverse Osmosis Water Purifier Item Number BP-500G Related Voltage and Frequency 10 0V-240V~50/60Hz Rated Power Water Pressure 0.1-0.4MPa Purified Water Rate 1.0L/min Rated Capacity of Purified Water 2000L Applicable Conditions Temperature 4-40°C, ambient humidity below 90% Water Source Municipal Water Product Size 443*132*356mm... -
Page 7: Ro Technical Drawings
RO Technical Drawings Product Spare Parts Technical Principle... -
Page 8: Product Introduction
Electric Principle Diagram Product Introduction Product Function Stage 1: PP+Carbon Filter: Removes dirt,corrosion,sediment,red worms,sand and other physical particles to protect the RO membrane. Stage 2: RO Membrane:Reverse Osmosis Membrane with the filtration precision 0.0001 μ m removes bacterial,virus,antibiotics and other harmful substances,heavy metal and pesticide residues from water. -
Page 9: Installation & Maintenance
Installation & Maintenance Installation This RO system shall be installed by authorised and skilled personnel only. Please check all accessories before installation. Requirements of Installation Conditions 1.1 The RO system is equipped with a booster pump and shall be used with tap water only. 1.2 Please use the right adapter for voltage 100V-240V. - Page 10 Installation of Quick Connector 3.1 Quick connector ports are adopted on the inlet and outlet of the RO system. Quick connector is a port which can connect quickly and firmly without any tools. Firstly,pull out the Ω type clip on the port,push the movable plastic ring to the port,make it attaching to the port to move the plastic plunge or PE pipe.
- Page 11 RO Cartridge Installation 4.1 Press top button "Open”, take the lid down and put aside. 4.2 Take out the cartridges from carton, remove the outer plastic packing. 4.3 Install cartridges according to the instructions on the top cover. 4.4 After installation, put the lid back on machine. Installation Place: Place the machine on a flat and stable surface.
- Page 12 6.4 Connection of purified water port:Connect the 1 /4" fitting to one side of faucet,cut the 1/4" PE pipe to a suitable length,one side insert to the quick connector and the other side connect to the port of purified water on the machine. 6.5 Connection of drinking water port:Connect directly with the connecting rod of faucet,cut the 1 /4"...
- Page 13 Operation The RO system is equipped with an LED display.When connecting the power supply,the machine buzzes once and goes into rinse mode. 1. Rinse 1 )Auto Rinse: Every time the power supply is connected the RO system will flush automatically. If the system is not used for more than 72 hours, the system will flush automatically.
- Page 14 7. LED display content as following: Installation & Maintenance Cartridge Replacement Time Cartridge PP + Carbon Filter RO Membrane T33/Coconut Carbon Cartridge Replacement Time 6 Months 18 Months 12 Months The cartridge replacement time is according to the local water quality and usage. Above replacement time is only for reference.
- Page 15 Installation & Maintenance Attention: 1. Please replace the cartridge in turn and make sure in right position. 2. The cartridge life will be different according to the area, water quality, season and working time. Please change them in time as actual usage Maintain the RO system ♦When cleaning the RO system, do not use soap, detergent and strong volatile solvent like thinner, gasoline and alcohol, it will cause the cracks...
-
Page 16: Troubleshooting
Troubleshooting...
Need help?
Do you have a question about the SMART PURIFIER BP-500G and is the answer not in the manual?
Questions and answers