Operating Instructions - German pool DHM-906 User Manual

Operation Instructions
A. Basic Operation
Plug in the power source, the product enters into standby
state, press to turn on the product. Ensure the power sup-
ply of the product is consistent with the power grid.
Note:
The product is set at Dehumidify Mode by default after initial
power-on. Press
Dehumidify modes.
Dehumidify Mode
By default, the fan speed is set to High and is adjustable by pressing
buttons to adjust desired humidity level (Min 35%RH*; Max 85%RH*).
Note:
If the set humidity level is higher than ambient humidity, Dehumidify Mode will not activate.
Fan Mode
By default, the fan speed is set to Low and is adjustable by pressing
the compressor does not work. LED Display shows ambient humidity (30-90%RH*) and
the humidity level cannot be set.
Eco Mode
By default, Eco Mode humidity level is set at 60%. LED display shows ambient
humidity (30-90%RH*) and the humidity level cannot be set.
a) When ambient humidity ≥ 60%, the product will work in Dehumidify Mode. The fan
speed is not adjustable.
b) When ambient humidity < 60%, the product will work in Fan Mode. The fan speed is
not adjustable.
*RH stands for Relative Humidity
to circulate among Fan, Eco, Dry, Auto and
P.11
. Press and
, in Fan Mode,