Advertisement
產品結構
Product Structure
按鍵 Button
1.電源開關鍵 Power Button
待機狀態下，按"電源"鍵開機，電源指示燈亮綠色；開機狀態下，按"電源"鍵關機進入待機狀態，
電源指示燈變紅色。
In standby mode, press "Power" button to turn on the unit. The indicator will light up in green. In power-on mode,
press "Power" button to enter into standby mode.The indicator will light up in red.
2.模式鍵 Mode Button
按"模式"鍵，可依次選擇工作模式: 送風、節能、乾衣、自動、除濕功能。
Press "Mode" button to select operation mode in sequence: Swing, ECO, Dry, Auto, Dehumidify.
3.下調鍵 Down Button
按一下按鍵可向下調整設定濕度或定時時間。
Press the button to adjust humidity level and timer downwards.
4.上調鍵 Up Button
按一下按鍵可向上調整設定濕度或定時時間；持續按鍵3秒可選擇UV燈功能。
Press the button to adjust humidity level and timer upwards; press it for 3 seconds to select UV lamp function.
5.風速鍵 Fan Speed Button
按"風速"鍵，可依次選擇高風速或低風速。
Press the button to select high or low speed in sequence.
6.定時鍵 Timer Button
按"定時"鍵，可設置定時、查詢定時、取消定時。
Press the button to set, check and cancel timer function.
+
7.童鎖鍵Child Lock Button
同時按下"定時"+"風速"鍵：可開啟或關閉童鎖功能。
Press "Timer" and "Fan Speed" at the same time: turn on or turn off the child lock function.
P.10
操作說明
Operating Instructions
A. 基本操作步驟 Basic Operation
插上電源插頭
請注意要保證機器電源和電網一致。
Plug the power cord.
Ensure the power supply of the unit is consistent with the power grid.
除濕模式 Dehumidify Mode
首次通電開機後預設除濕模式或按模式鍵進入除濕模式，預設高風速，按上下調節鍵可調整設定濕度
（35-85%）。
The unit enters into dehumidify mode by default after its initial power-on or by pressing the mode button. By
default, the fan speed is high. Press up and down buttons to adjust desired humidity level (35-85%).
送風模式 Swing Mode
按模式鍵進入送風模式，壓縮機不工作，默認低風速，風速可調整，顯示環境濕度（30~90%RH），不可
設定目標濕度。
Press the mode button to enter into swing mode. The compressor does not work and the unit runs at default low
fan speed which is adjustable. Ambient humidity (30~90%RH) displays and the humidity level cannot be set.
乾衣模式 Dry Mode
按模式鍵進入乾衣模式，壓縮機不受設定濕度限制連續運行，強制高風速，風速不可調，顯示環境濕度
（30~90%RH），不可設定目標濕度。
Press mode button to enter into dry mode. The compressor works continuously, not limited by the set humidity. The
fan speed is high by force and is not adjustable. Ambient humidity (30~90%RH) displays and the humidity level
cannot be set.
自動模式 Auto Mode
按模式鍵進入自動模式，預設濕度50%。
Press the mode button to enter into auto mode in which default humidity level is 50%.
a）當環境濕度≥70%時，進入強除濕狀態，風速不可調。
When ambient humidity≥70%, the unit will work in strong dehumidifying condition and the fan speed is not
adjustable.
b）當50%≤環境濕度＜70%時，進入弱除濕狀態，風速不可調。
When 50%≤ambient humidity＜70%, the unit will work in weak dehumidifying condition and the fan speed is not
adjustable.
c) 當環境濕度Hr＜50%時，進入送風狀態，強制低風速，風速不可調。
When ambient humidity Hr＜50%, the unit will work in swing mode at low fan speed. The fan speed is not
adjustable.
d) 顯示環境濕度（30~90%RH），不可調整設定濕度。
The unit shows ambient humidity (30~90%RH) and the humidity level cannot be adjusted.
P.11
Advertisement
