Bluetooth Intercom - Cardo Systems PACKTALK NEO Manual

5.1.2.5 MULTIPLE AUDIO SOURCES AND VOLUME MANAGEMENT
DMC Intercom and FM Radio:
The PACKTALK NEO can use parallel audio streaming to stream audio from two connected sources
simultaneously, so that you can listen to your music or the FM radio while holding a DMC Intercom
conversation. PACKTALK NEO automatically manages your music and FM radio volume while using DMC
Intercom. PACKTALK NEO also automatically manages DMC Intercom volume with mobile phone calls and
GPS.
DMC Intercom and mobile phone calls:
You can receive a phone call during a DMC conversation. The phone will ring simultaneously with the DMC
conversation, and you will be able to inform the group that you are going to answer a call.
PACKTALK NEO also automatically manages DMC Intercom volume with Mobile phone calls.
DMC Intercom and GPS:
PACKTALK NEO automatically manages DMC Intercom volume with GPS.

5.2 BLUETOOTH INTERCOM

To connect your unit to another unit with a Bluetooth intercom, such as a Cardo Bluetooth unit or other
Bluetooth-enabled devices, you must first pair their channels. Once paired, the unit automatically recognizes
the other one whenever they are in range. But they will not connect automatically. To start a Bluetooth
intercom call, see Starting/Ending Bluetooth Intercom Calls
Pairing a channel replaces any existing paired unit on that channel with the new unit.
●
If you purchased the PACKTALK NEO DUO, the retail package contains two pre-paired units.
●
The Intercom range with other models is limited to the distance of the unit with the shorter range.
●
Your PACKTALK NEO Supports Live Intercom technology for the connection to Cardo Bluetooth intercom
riders. In case of disconnection, Live Intercom enables an automatic reconnection to the other riders when you
get back to the range:
Once the other rider is disconnected, an announcement "Reconnecting" will be heard. Your unit will "beep"
●
every 20 seconds while trying to reconnect.
It is possible to terminate the reconnection attempts manually by tapping the intercom button once.
●
The sequence of reconnection attempts is limited to 5 minutes. The intercom will be disconnected after
●
this period of time, and you will need to initiate it.
When you are connected to a regular Bluetooth unit, the reconnection will be initiated only from your side.
●
When you are connected to a Cardo unit supporting Live Intercom, the reconnection will be initiated from
both sides, and will be faster.
on page 24
22