Cardo Systems PACKTALK NEO Manual page 19

If your DMC group splits with some group members remaining in range of each other but not in range of all
group members, you can continue speaking with the members still in range. Once in range of any other group
member, you automatically reconnect.
If you join a new DMC group, you automatically leave your existing DMC group. You can go back to the group
with Cardo Connect App.
If you purchased the PACKTALK NEO DUO, the package contains two units belonging to the same
●
DMC Intercom group. No group creation is required.
5.1.1.1 CREATING DMC INTERCOM GROUPS
When creating a DMC group, you must coordinate with the other riders who will be the group creator. When
creating s group, all members should be within 5 meters (16 feet).
1. All the riders press
2. After each member joins successfully, the LEDs of the joined unit and the admin's unit announces how
many riders are connected.
After grouping is completed, the DMC Intercom conference starts automatically.
When switching your unit ON, a voice message announces how many riders from your group are in the
range.
To create a DMC group with a device from the previous generation of DMC, this device first initiates the
group as Admin, and only after PACKTALK NEO devices can initiate grouping.
5.1.1.2 JOINING DMC INTERCOM GROUPS
You can join or rejoin a DMC Intercom group previously created.
To join an existing DMC group:
1. The group admin allows the additional rider by selecting "Add a rider" in the Cardo Connect App.
2. Press for 5 seconds. The LED flashes red and green quickly.
The color of the flashing LED indicates whether you have been added to the group:
Purple: You have successfully joined the group.
●
Yellow: You cannot join the group because it has already reached the maximum number of riders.
●
Red: Failed to join.
●
for 5 seconds. The LED flashes red and green quickly.
19