Setting Up Non-Dmc Intercom - Cardo Systems PACKTALK NEO Manual

5.2.1 SETTING UP NON-DMC INTERCOM

DMC is always the best way to connect a group of riders. If you happen to ride with a group of riders that do not
have DMC devices (such as Bluetooth communicators by Cardo or by other brands), you can switch your unit
to Bluetooth mode and create or join a non-DMC group. The participating riders are connected in a chain with a
maximum total of four riders.
To set up a non-DMC intercom (Cardo or non Cardo) :
1. Confirm your Cardo unit is in Standby Bluetooth intercom mode (LED flashes blue slowly).
If your unit is not in Bluetooth intercom mode, use the Cardo Connect App. Select intercom, then Bluetooth
Mode. For more information see,
Universal Bluetooth Intercom for non-Cardo units: a non-Cardo unit should be on phone pairing mode.
2. To initiate 2-way pairing:
Select Intercom
Bluetooth intercom pairing needs to be initiated on the other device.
3. To add a 3rd rider:
Switching between Intercom modes
Switch to Bluetooth mode
23
on page 26.
Select the Bluetooth rider