Riding With Others; Bluetooth Intercom; Setting Up Bluetooth Intercom Groups - Cardo Systems FREECOM 4+ Manual

4. RIDING WITH OTHERS

4.1 BLUETOOTH INTERCOM

To connect your unit to another unit with a Bluetooth intercom, such as a Cardo Bluetooth unit or other Bluetooth-
enabled devices, you must first pair their channels. Once paired, the units automatically recognize each other
whenever they are in range (line of sight up to 1.2 km / 3,900 ft subject to terrain).
Pairing a channel replaces any existing paired unit on that channel with the new unit.
●
If you purchased the FREECOM 4+ DUO, the retail package contains two pre-paired units.
●
The Intercom range with other models is limited to the distance of the unit with the shorter range.
●

4.2 SETTING UP BLUETOOTH INTERCOM GROUPS

You can use your FREECOM 4+ to create or join a Bluetooth group. The participating riders are connected in a
chain with a maximum total of four riders.
To set up a Bluetooth group:
1. Confirm your unit is in Standby mode (LED flashes blue slowly).
2. To initiate 2-way pairing:
On your unit, press
●
The LED flashes red.
The following announcement is heard: Rider A pairing.
●
Bluetooth intercom pairing needs to be initiated on the other device.
The unit confirms that pairing has succeeded.
3. To add a 3rd rider:
Press for 5 seconds. The LED flashes red.
●
Tap 2 times. The LED flashes blue.
●
The following announcement is heard: Rider B pairing.
for 5 seconds to enter pairing mode.
12