Make Calls; Proximity Sensor; Voice Calls; During A Call - Nokia 5800 XpressMusic User Manual

Nokia 5800: user guide
Hide thumbs Also See for 5800 XpressMusic:
Table of Contents

Advertisement

4. Make calls

Proximity sensor

Your device has a proximity sensor. To prevent accidental
selections, the touch screen is disabled automatically during
calls when you place the device next to your ear.
Do not cover the proximity sensor, for example, with
protective film or tape.

Voice calls

1. In the home screen, select
enter the phone number, including the area code. To
remove a number, select C.
For international calls, select * twice for the + character
(which replaces the international access code), and enter
the country code, area code (omit the leading zero if
necessary), and phone number.
2. To make the call, press the call key.
3. To end the call (or to cancel the call attempt), press the
end key.
Pressing the end key always ends a call, even if another
application is active.
To make a call from the contacts list, select
Contacts. Scroll to the desired name. Or, tap the search field
to enter the first letters of the name, and scroll to the name.
To call the contact, press the call key. If you have saved several
numbers for a contact, select the desired number from the
list, and press the call key.
28
to open the dialler, and
Menu
>

During a call

To mute or unmute the microphone, select
To put the call on hold or unhold it, select
Do not hold the device near your ear when the loudspeaker
is in use, because the volume may be extremely loud. To
activate the loudspeaker, select
compatible headset with Bluetooth connectivity, to route the
sound to the headset, select
handsfree.
To switch back to the handset, select
To end the call, select
To switch between the active and the held call, select
Tip: When you have only one active voice call, to put
the call on hold, press the call key. To activate the call,
press the call key again.
To send DTMF tone strings (for example, a password), select
Options
Send
DTMF. Enter the DTMF string or search for
>
it in the contacts list. To enter a wait character (w) or a pause
character (p), press * repeatedly. To send the tone, select
OK. You can add DTMF tones to the phone number or DTMF
field in contact details.
To end an active call and replace it by answering the waiting
call, select
Options
> Replace.
To end all your calls, select
or
or
. If you have attached a
Options
Activate BT
>
.
.
.
© 2009 Nokia. All rights reserved.
.
.
.

Advertisement

Table of Contents
loading

This manual is also suitable for:

5800d-1

Table of Contents