Contacts Bar; Offline Profile; Sensor Settings And Display Rotation - Nokia 5800 XpressMusic User Manual

Contacts bar

Start using the contacts bar
To start using the contacts bar and add your contacts to the
home screen, in the home screen, select
to Home screen, and follow the instructions.
To add a contact to the home screen in contacts bar mode,
select and either select a contact from your contacts, or
create a new contact, and add a photo to the contact
information.
To communicate with your contact, select the contact and
from the following:
— Make a phone call.
●
— Send a message.
●
— Modify contact information.
●
— Refresh the contact's web feeds.
●
To view past communication events with a contact, select a
contact. Select a communication event to view event details.
To close the view, select

Offline profile

To activate the Offline profile, press the power key briefly,
and select Offline.
The Offline profile lets you use the device without connecting
to the wireless network. When you activate the Offline
profile, the connection to the wireless network is turned off,
as indicated by in the signal strength indicator area. All
wireless RF signals to and from the device are prevented. If
© 2009 Nokia. All rights reserved.
Add contact
>
.
you try to send messages, they are placed in the Outbox folder
to be sent later.
When the Offline profile is active, you can use your device
without a SIM card.
If the SIM card is not properly in place, the device starts in the
Offline profile.
Important: In the offline profile you cannot make or
receive any calls, or use other features that require cellular
network coverage. Calls may still be possible to the official
emergency number programmed into your device. To make
calls, you must first activate the phone function by changing
profiles. If the device has been locked, enter the lock code.
When you have activated the offline profile, you can still use
the wireless LAN, for example, to read your e-mail or browse
on the internet. Remember to comply with any applicable
safety requirements when establishing and using a wireless
LAN connection. You can also use Bluetooth connectivity
while in the offline profile.
To switch to another profile, press the power key briefly, and
select another profile. The device re-enables wireless
transmissions (providing there is sufficient signal strength).

Sensor settings and display rotation

When you activate the sensors in your device, you can control
certain functions by turning the device.
Select Menu Settings
>
Select from the following:
Sensors — Activate the sensors.
●
and Phone Sensor settings.
>
25