Table of Contents
Advertisement
To install the filters align the rear tabs with the slots in the hood.
Push in the metal tab, push filter into position and release. Make
sure that the filter is securely engaged after assembly.
LED LAMPS
To change the lights first switch off the rangehood at the power
outlet. Wait until the lights have cooled down before attempting
to remove them from the rangehood.
Using a sharp blade similar to that in a "Stanley knife" slide it
between the surround of the light and the stainless steel. The
light will pop out. Undo the terminal connection and replace the
LED lights with the same kind.
CLEANING THE STAINLESS STEEL HOOD UNIT
Use a non abrasive stainles steel cleaner applied with a soft
cloth.
CLEANING THE REMOTE MOTOR UNIT
The roof space motor unit should be checked from time to time
to make sure that it is free of debris that could obstruct airflow
and check that the ducting remains in good condition.
SERVICING
It is important that the installation of the rangehood takes into
account accessability for servicing. If access requires damage to
walls, tiles or finishes it will not be covered under the warranty.
We strongly recommend keeping the rangehood filters clean.
They are easy to wash and with regular care will provide many
years of good service.
The stainless steel should only be cleaned with a quality non
abrasive cleaner. We recommend just using a soft cloth with hot
water. Detergents will cause streaking and some detergents can
attack the surface of the stainless steel.
12
Advertisement
Table of Contents
