Table of Contents
Advertisement
roof joists if required.
3. Feed the duct through from the rangehood and attach to the
inlet side of the motor unit. Get the duct as taut as possible
to stop noise from vibration. It is important that the duct does
not rest against the stainless steel chimney.
4. Attach another length of duct to the outlet side with the
ducting then directed to an external vent in the roof or wall.
5. Ensure that there are no leaks and seal with duct tape. The
ducting fits very tightly. Stretch the end of the ducting out
and it will fit very well.
10
Advertisement
Table of Contents
