Adjusting Method - Sony SAL55200-2 Service Manual
Lens for dslr camera
Hide thumbs
Also See for SAL55200-2:
- Operating instructions (2 pages) ,
- Precautions before using (2 pages) ,
- Specifications (35 pages)
Table of Contents
Advertisement
2. Adjusting Method
1)
Loosen a little two screws and move them right and left so that the function lever of the preset ring can be moved right and left.
2)
Move the two screws while seeing the lights from the rear lens element side, and tighten two screws at the point where the diaphragm
blades are hidden into the edge completely.
Apply the adhesive
bond (B-10)
3)
Perform "4-2-1. Aperture Diameter Check', and repeat steps 1) to 2) until the aperture error is within the specification.
4)
After finishing the adjustment, apply the bond (B-10) to the heads of two screws tightened in step 2).
SAL55200-2 (DT 4-5.6/55-200 SAM) (DT 55-200mm F4-5.6 SAM)
Two Screws
Fig.4-2-3
4-6
4-1-2. Adjustment Flow Chart
Advertisement
Table of Contents
