4-2.
APERTURE DIAMETER CHECK/ADJUSTMENT
Equipment (Only the specific equipment is listed)
• Adhesive bond (B-10)
4-2-1. Aperture Diameter Check
1. Checking Method
1)
Perform "LENS GENERAL ADJUSTMENT GUIDE 2. APERTURE DIAMETER CHECK"
Specification: Aperture error = 0 to ±20 (WIDE end: 55mm)
2)
If the aperture error does not meet the specification, perform "4-2-2. Aperture Diameter Adjustment"
SAL55200-2 (DT 4-5.6/55-200 SAM) (DT 55-200mm F4-5.6 SAM)
4-1-2. Adjustment Flow Chart
4-4