Sony SAL55200-2 Service Manual page 33

4-9. FINISHED ADJUSTMENT/INSPECTION (ActuatorCheckerSAM)
4-9-1. Preparations
1) Connected to equipment with checking lens. (Refer to LENS GENERAL ADJUSTMENT GUIDE Section 1-2-2.)
2) Start up the lens adjustment program (ActuatorCheckerSAM)
Click [Set up], and perform the initial setting. (Refer to LENS GENERAL ADJUSTMENT GUIDE Section 1-3.)
3)
4-9-2. Finished Inspection Item
1. Adjustment/Inspection Method
Click [Start "Ent'].
1)
2) Operate as instructed in the menu.
2. Inspection Item
1) AF/MF Switch
2) LVDD1 Consumption Current
3) Zoom Pattern
4) Adjust PI
5) Focus Pattern (Motor)
6) Stopping Accuracy
7) Write SB
8) Focus Pattern
9) Search Zoom-Adj
10) Search Focus-Adj
Note:
This three items are not adjusted automatically in case of
starting Adjustment/Inspection with clicking [Start "Ent'].
SAL55200-2 (DT 4-5.6/55-200 SAM) (DT 55-200mm F4-5.6 SAM)
4-1-2. Adjustment Flow Chart
4-19
Fig.4-9-1