Sony SAL55200-2 Service Manual page 10

HELP05
Grease (G-32): J-6082-666-A
1. Apply the grease (G-32) to the middle barrel and the inner bayonet portions of zoom ring.
2. Assemble the zoom ring, aligning the projections of zoom ring with the grooves of main assy.
3. Apply the grease (G-32) to the indicated portion of zoom linkage plate.
4. Align the screw holes on the side of zoom ring (hole for fixing the screw of zoom linkage plate) with the installation positions of the
zoom linkage plate by rotating the zoom ring and fix it with two screws.
Note:
Set the zoom to the WIDE end and install the zoom linkage plate.
Apply the grease (G-32)
Main Assy
(WIDE)
SAL55200-2 (DT 4-5.6/55-200 SAM) (DT 55-200mm F4-5.6 SAM)
Two Screws
Zoom Ring
Middle Barrel
Bayonet Portion
Installation position
(Zoom Linkage Plate)
Zoom Linkage Plate
Zoom Ring
Groove
Groove
Groove
Main Assy
Apply the grease (G-32)
Projection
Projection
Zoom Ring
Projection
HELP