Set Manual Touch Tones; Set Length - Nokia 2260 User Manual

Set manual touch tones

1 From the menus, select Settings > Phone settings > Touch tones >
Manual touch tones.
2 Select one of the following options:
Continuous—Sound the tone for as long as you press and hold a key.
Fixed—Set the tone to a fixed length, regardless of how long you press a key.
Off—Turn off the tones. No tones are sent.

Set length

You can also set the length of each touch tone.
1 From the menus, select Settings > Phone settings > Touch tones >
Touch tone length.
2 Select either Short (0.1 second) or Long (0.5 second).
Store
You can store touch tone strings the same way that you store names and numbers in your
contact list. You can store an entire sequence of digits and send it as touch tones for
frequently used strings of numbers.
1 Enter the phone number that you want associated with a touch tone.
2 Enter the touch tone character where needed (p, w, or
3 Enter the touch tone string.
4 Store the number as you normally would.
Send
1 From the menus, select Settings > Phone settings > Touch tones >
Manual touch tones.
2 Select either Continuous or Fixed (not Off).
3 During the call, select Options > Touch tones.
4 Enter the touch tone string or recall the string from the contact list, and select OK.
If you send touch tones while in the analog mode, be careful not to send confidential
information.
Nokia 2260 User Guide 39
Advanced calling features
*
).
Copyright © 2004 Nokia