Set Manual Touch Tones; Set Touch Tone Length - Nokia 2260 User Manual

2260.ENv1_9355957_.book Page 68 Wednesday, February 26, 2003 11:27 AM
Advanced calling features
You must be in the
as usual. When you want to insert the special characters, press
switch among *, +, p, w characters.
Note: Use caution when sending confidential information, if voice privacy
is not active.
Character
Creates a pause when a number is dialed. The numbers you
p enter after this special character are automatically sent as
touch tones after a 2.5-second pause.
Creates a wait when a number is dialed. This means that
w your phone waits for you to press the left selection key
before it sends the number as touch tones.
Sends command strings to the network. Contact your
*
service provider for details.
Use this character to link a 1-touch dialing number to a
+
number in the contact list.

Set manual touch tones

1 Press Menu 4-3-2-1 (Settings > Phone settings > Touch tones > Manual
touch tones).
2 Select one of the following options, then press Select:
Continuous: Sounds tone for as long as you press and hold a key.
Fixed: Sets the tone length to 0.1 second, regardless of how long you press a key.
Off: Turns off the tones. No tones are sent.

Set touch tone length

You can also set the length of each touch tone.
1 Press Menu 4-3-2-2 (Settings > Phone settings > Touch tones > Touch
tone length).
2 Use the Scroll up or Scroll down key to scroll to Short or Long.
Short sets the tone length to 0.1 second. Long sets the tone length to 0.5 second.
3 Press Select.
mode to enter these characters. Enter the numbers
Action
68 Copyright © 2003 Nokia
*
repeatedly to