Set Manual Touch Tones; Set Touch Tone Length; Store Touch Tone Sequences (Strings) - Nokia 3360 User Manual

Set manual touch tones

1 Press Menu 4 > 3 > 2 > 1 (Settings > Phone settings > Touch tones >
Manual touch tones).
2 Select one of the following options, and then press Select:
Continuous
Fixed
8
Off

Set touch tone length

You can also set the length of each touch tone.
1 Press Menu 4 > 3 > 2 > 2 (Settings > Phone settings > Touch tones >
Touch tone length).
2 Use
to 0.1 second. Long sets the tone length to 0.5 second.
3 Press Select.

Store touch tone sequences (strings)

You can store touch tone strings the same way that you store names and
numbers in your phone book. You can store an entire sequence of digits
and send it as touch tones for frequently used strings of numbers.
STORE TOUCH TONE STRINGS WITH PHONE NUMBERS
1 Enter the phone number that you want associated with a touch tone.
2 Press w or p where needed.
w (wait): When you dial this phone number, your phone first dials the
number, and then waits (because of the w character) for you to press
Send. When you press Send, the phone sends your touch tone.
p (pause): If you include a p character instead of a w, your phone
pauses for 2.5 seconds and then automatically sends the touch tone.
The tone sounds for as long as you press and hold a key.
Sets the tone length to 0.1 second, regardless of how
long you press a key.
Turns off the tones. No tones are sent when you press
a key.
or to scroll to Short or Long. Short sets the tone length
[ 54 ]