Kessler AT-AUTO Operating Manual page 81

3. Download "Kessler Engineering - Firmware Uploader" software from our website at:
http://www.Kessler EngineeringLLC.com. The software is located in the "Down-
loads" section.
4. Unzip the software and place it in a folder on you PC desktop or hard drive.
5. Connect your AT-AUTO
supplied "Firmware Upload Cable" (See Figure 8.1 on page 81).
6. Turn On your Kessler Engineering AT-AUTO
7. Make sure your PC is connected to the Internet.
8. Locate the "Firmware Uploader" software and double click on the icon to start the
software
9. The program will start and you should see the following screen:
www.KesslerEngineeringLLC.com
to your PC's RS-232 serial port with the Kessler Engineering-
(tm)
.
(tm)
73