CONTENTS & FEATURES
Contents
Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Features
UBIQUITY CLOUD SITE GATEWAY
Enables controller interoperability with Ubiquity
•
Enables Ubiquity to maintain controller programming
•
and scheduling
•
Compatible with all TCS Basys supported controllers
Controller protocols supported: TCSbus, Modbus
•
Supervisory control routines and override strategy
•
•
Auto discovery of networked controllers
Three (3) integrated RS-485 serial ports
•
Additional serial ports can be added via USB ports
•
Integrated Ethernet controller with firewall
•
•
Integrated configuration web page
User adjustable controller monitoring rate
•
Remotely upgradable gateway software
•
ENERGY METER (SEQ100)
Utility Pulse Counting Meter for Monitoring of:
Electric single and 3 phase kW and kWh
•
Gas
•
Water
•
BT
•
LIGHTING CONTROLLER (SLQ218)
365-day programming for each circuit
•
•
Analog input for photo sensor with the ability
toprogrammingremotely adjust sensitivity level
Analog input for photo sensor with the ability to
•
remotely adjust sensitivity level
Selectable power failure state
•
Eight-channel lighting schedules for interior and
•
exterior applications
Digital photocell inputs
•
Astronomical clock
•
2
2800 Laura Lane • Madison, WI 53562 | 800.288.9383 • fax: 608.836.9044 | www.tcsbasys.com
. . . . . . . . . . .
Setup . . . . . . . . . . . . 3
. . . . . . . . . . . . . . . . . . . . . . .
External time clock or occupancy sensor input for each
•
channel
Channel status LEDs
•
Selectable normally open or normally closed relays
•
Built-in 2 Amp relays with hand/off/auto switches
•
1
Factory IP Network Address
Configuration
QWL 3 .1 Rev 3 Series Panels are typically ordered pre-pro-
5
grammed to customer specific networks and no additional
6
software configuration is required. This is the preferred
purchasing method .
If a QWL 3 .1 Rev 3 Series Panel is purchased without
pre-programming, it will be shipped with the DHCP client
enabled. The configuration page is available through a
browser for additional configuration of the QWL 3.1 Rev 3
Series Panel at the local IP address . Contact your network
administrator to determine the local IP address (refer to
the MAC address available on the product label).