Vantrue Element 3 User Manual page 24

Framerate Mode/OFF.
-Low-light Night Vision in Parking Mode: Default is on. When turned on, it
can optimize the recording effect of videos in parking mode.
EN EN -GPS Settings: GPS is enabled by default. GPS ON/OFF settings, speed
unit settings, and GPS information are all set here.
B. System Setup
-Language: Available languages are Engish/Français/Español/Deutsch/I-
taliano/简体中文/русский/日本語/Polski.
-WiFi: The default setting is 2.4GHz. You can choose the options between
2.4GHz and 5GHz. After WiFi is enabled, mobile phones can connect to
WiFi and operate the dash cam through mobile phone interfaces.
-Voice Control: The default sensitivity is Standard. Voice commands can
be recognized after the option is turned on. You can choose options
such as low sensitivity/high sensitivity/standard/off.
-Voice Content: Voice recognition commands. You can use different
commands to remote control the camera to work.
-Format Memory Card: Format all data on the memory card.
-Format Reminder Setup: Select the reminder options: 15 Days, 1 Month,
and Off. Default is off.
To prevent you from forgetting to format the memory card regularly, we
have added a format reminder time setting. You can choose to be
reminded after 15 days or 1 month, and calculate 15 days or 1 month
from the set date. When the time is up, you can choose "OK" to format,
or choose "Next."
Note: If you changing the format reminder option, the timing will restart
as soon as the option is changed.
-Date&Time: There are two ways to set the time and date: 1. GPS
automatic update, 2 Manual date/time setting. GPS automatic update is
enabled by default.
GPS automatically updates the date and time based on your time zone,
- 20 -