Hornbach 6497422 Instructions Manual page 28

28 | ENGLISH
Dismounting of the Motor
1.
Retract the awning and unplug
its mains plug.
4.
Invert the product onto the
console.
7.
Loosen the end cap screws with
an Allen wrench.
10.
Remove the end cap.
2.
Remove the diagonal brace of
awning.
5.
Tie the four spring-loaded arms
of the awning with straps to pre-
vent them from bursting open in
step 6.
8.
Screw out the cross-head
screws of the end cover at the mo-
tor end.
11.
Pull the motor out.
3.
Remove the awning from the
standing pole.
6.
Loosen the motor lifting ring
and open a little cloth.
9.
Unplug the LED connector.
12.
Control gear is built-in with
the motor.