Safety Information; Charging Your Vehicle - Lectron CCS Combo 2 to Type 2 Adapter User Manual

Safety Information

1. Read this document before using the CCS Combo 2 to Type 2 Adapter.
Failure to follow any of the instructions or warnings in this document can
result in fire, electrical shock, or serious injury.
2. Do not use it if it appears defective, cracked, frayed, broken, damaged or fails
to operate.
3. Do not attempt to open, disassemble, repair, tamper with, or modify the
adapter. Contact Lectron Customer Support for any repairs.
4. Do not disconnect the CCS Combo 2 Adapter while charging the vehicle.
5. Protect from moisture, water, and foreign objects at all times.
6. To prevent any damage to its components, handle with care when
transporting. Do not subject to strong force or impact. Do not pull, twist,
tangle, drag, or step on it.
7. Do not damage with sharp objects. Always inspect for damage before each
use.
8. Do not use cleaning solvents to clean.
9. Do not operate or store in temperatures outside the ranges listed in its
specifications.
Introduction to Parts
CCS Combo 2 to Type 2 Adapter
To CCS Combo 2
Charging Station

Charging Your Vehicle

1. Connect the CCS Combo 2 Adapter to the charging station cable, ensuring
that the adapter is fully attached.
Note:
After connecting the adapter to the charging station, wait at least 10
seconds before plugging the adapter into your vehicle.
To Tesla
2. Open the charging port of your vehicle and plug the CCS Combo 2 Adapter
into it.
To Tesla
Page 2
CCS Combo 2
Charging Station
Cable
Page 3